Kasanova K-GYM Manual De Instrucciones página 20

SPIN BIKE
20
ASSEMBLY INSTRUCTIONS
STEP 1
The Front Stabilizer (2) is fixed on the Main Body (1) with Carriage Bolts (16), Flat
washers (17) and Cover nuts (18), and fixed with open Spanner (25). Note: the move
wheels of the Front Stabilize(2) are forward,as shown.
Similarly, the Rear Stabilizer (3) is fixed on the Main Body (1) with carriage Bolts (16),
flat washers (17) and cover nuts (18), and fixed with open Spanner (25).
Attention: The foot adjusters on the rear stabilizer (3) can adjust the machine to the
ground smoothly.The moving wheels on both sides of The Front Stabilizer (2) can move
the machine in a short distance.