Technical Instructions For Radiators - Gorenje Tiki FINO Instrucciones Técnicas

TECHNICAL INSTRUCTIONS FOR RADIATORS

1 DEAR CUSTOMER
When you purchase your products, please inspect it immediately and check its
contents. Eventual claims may be realized immediately at your dealer's. Request
your warranty papers to be correctly filled. Read warranty conditions and technical
instructions. Only let the authorized person to install the product. It is his responsibility
to make sure the product will operate without malfunctions. In case of eventual claim
follow the instructions from the warranty. Any claims resulting from non-authorized
installation, inadequate trial operation, installation of damaged product and similar
cases, should be reported to the installation personnel.
2 TO THE INSTALLATION PERSONNEL
The product must be installed in accordance with technical standards of the industrial
branch. Prior installation of pipe radiator, the heating plumbing must be flushed and
dirt removed (especially important in new constructions and adaptations).
3 INSTRUCTIONS FOR USE
Working pressure: 0,6 MPa (approx. 6 bar or 6 atm.) Temperature up to 363 K
(90°C). We do not recommend draining the central heating system. In case this
should, however, prove necessary (completion of work or similar), radiator must
be disassembled, flushed with clean water and dry, otherwise the warranty for the
product is rendered void.
4 INSTRUCTION FOR INSTALLATION
C
The manufacturer provides 4 brackets for installation . Radiator is mounted to
the wall by means of brackets (see Fig.), and connected to the inlet and outlet valve
of the home central heating installation.
5 MAINTENANCE
Radiator must be filled with water at all times. Air release is performed via the release
valve on top of the radiator. Radiator is cleaned with mild liquid detergents.
6 GENERAL
Radiator is packed in wrapping, with reinforced edges and wrapped in stretch
foil. Package includes 4 mounting brackets , and warranty with technical
C
instructions.
10