JB Systems Light LC-1 Manual De Instrucciones página 3

ENGLISH
FUNCTIONS
1. KEY-ACTUATED POWER SWITCH: Used to put the laser controller in sleep
mode, only to be used by authorized personnel. When the controller is switched
off, the connected laser goes automatically in blackout.
2. BLACKOUT BUTTON: Used to put the connected laser in blackout, without
shutting it off.
3. CONVERSION BUTTON: Works only in one of the manual modes! The shape of
a selected pattern can be stretched in both horizontal and/or vertical direction.
The speed of the conversions can be adapted with the speed fader(8).
• Horizontal conversion: press the button 1 time
selected pattern will be stretched in horizontal direction.
• Vertical conversion: press the button a second time
on. The selected pattern will be stretched in vertical direction.
• Horizontal and vertical conversion: press the button a third time
leds are lit. The selected pattern will be stretched in both directions.
• No conversion: press the button a fourth time
shape of the selected pattern won't change anymore.
JB SYSTEMS 2/20 LC1 LASER CONTROLLER
OPERATION MANUAL
the left led turns on. The
the right led turns
both leds turn off. The
both