Operation; Using The Remote Control - HAMPTON BAY MTVS2500SE Guía De Uso Y Cuidado

Operation

1
Using the manual control
□ The manual controls are located on the firebox behind the
upper-front access panel.
□ To turn the firebox on and off, press the main power
switch (5).
□ Press the power button (1) on the control panel (T). The
flame effect will turn on.
□ Press the flame button (2) to achieve the desired effect (no
heat).
□ Press the low heat button (3) once for "low" heat.
□ Press the high heat button (4) once for "high" heat.
NOTE: The flame effect is always active when the heating
cycle is operational.
1
T
2 3 4
2

Using the remote control

NOTE: The main power button (5) on the firebox must be
turned on for the remote control to function.
□ Press the power button (1) on the remote control (W). The
flame effect will turn on.
□ Press the flame button (2) to achieve the desired effect (no
heat).
□ Press the low heat button (3) once for "low" heat.
□ Press the high heat button (4) once for "high" heat.
NOTE: The flame effect is always active when the heating
cycle is operational.
5
W
I
O
14
1
2
3
4