Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Basic Operations (continued)
Basic manual recording
Normal recording using manual operation is explained here.
Before starting recording, recording settings must be
checked. After checking the settings of "HDD REPEAT REC
MAIN", "HDD REPEAT REC SUB" in the <HDD SET-
TINGS> screen, the REC mode settings are made.
Settings here are for normal recording only. For
timer recording, settings must be made on the
<TIMER PROGRAM SETTINGS> screen.
Setting the recording interval and recording
picture quality for normal recording
To perform normal recording, "PPS" and "GRADE" must
be set for each camera.
Setting of "PPS" ( default : "1.563P" )
"3.125P", "1.563P", "1.042P", "0.781P", "0.625P",
"0.521P", "0.391P", "0.313P", "0.125P", "0.063P",
"0.031P", "0.016P", "- - - - - -"
"- - - - - -" : Recording cannot be performed with
camera set to this item.
Available recording intervals will vary according
to the number of cameras operating or ALARM RE-
CORDING settings. Interval displays will be accord-
ing to the chart.
Setting of "GRADE" ( default : "STD" )
"SUPER", "HIGH", "STD"(STANDARD), "BASIC",
"LONG"
Example : Set "PPS" of camera number "
and "GRADE" to "HIGH" for normal recording.
1. Press the SET UP button to display the <SETTINGS> screen.
2. Turn the JOG dial to move the cursor to "RECORD
SETTINGS" and turn the SHUTTLE ring clockwise.
• The <RECORD SETTINGS> screen appears.
<RECORD SETTINGS>
>>ALARM SETTING
RECORD SETTING
ALARM REC DURATION
MOTION DET REC
ARCHIVE OVERWRITE
ARCHIVE MEDIA AUTO EJECT
3. Turn the JOG dial to move the cursor to "RECORD
SETTING" and then turn the SHUTTLE ring clockwise.
• The <RECORD SETTING> screen appears.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
10
About <ESTD>
• The estimated recordable time is displayed as <ESTD>
depending on the "PPS" and "GRADE" settings. (The time
will not change when changing the alarm recording settings.)
The next page appears when select "NEXT PAGE"
as shown below in the screen and turn the SHUT-
TLE ring clockwise.
" to "0.313P"
1
4. Check to see that the cursor is positioned at "
then turn the SHUTTLE ring clockwise.
• The "PPS" setting reverses in color.
5S
ALARM
OFF
OFF
5. Turn the SHUTTLE ring clockwise again.
• The background of the "PPS" setting turns red and flashes.
The menu screen will not be cleared even when
pressing the SET UP button when the setting item
is flashing.
<RECORD SETTING> 1/2
Camera selection during alarm recording
<RECORD SETTING>
NO
PPS
GRADE A-PPS
>>
1
1.563P STD
1.563P STD
2
1.563P STD
1.563P STD
3
1.563P STD
1.563P STD
4
1.563P STD
1.563P STD
5
1.563P STD
1.563P STD
6
1.563P STD
1.563P STD
7
1.563P STD
1.563P STD
8
1.563P STD
1.563P STD
9
1.563P STD
1.563P STD
NEXT PAGE
SHUTTLE<<:BACK
<RECORD SETTING> 2/2
<RECORD SETTING>
NO
PPS
GRADE A-PPS
>>
10
1.563P STD
1.563P STD
11
1.563P STD
1.563P STD
12
1.563P STD
1.563P STD
13
1.563P STD
1.563P STD
14
1.563P STD
1.563P STD
15
1.563P STD
1.563P STD
16
1.563P STD
1.563P STD
PRE ALARM REC
( S
SHUTTLE<<:BACK
<ESTD REC>
D
The RECORD SETTING consists of 2 pages.
<RECORD SETTING>
NO
PPS
GRADE A-PPS
1
1.563P
STD
1.563P STD
2
1.563P STD
1.563P STD
3
1.563P STD
1.563P STD
4
1.563P STD
1.563P STD
5
1.563P STD
1.563P STD
6
1.563P STD
1.563P STD
7
1.563P STD
1.563P STD
8
1.563P STD
1.563P STD
9
1.563P STD
1.563P STD
NEXT PAGE
SHUTTLE<<:BACK
<RECORD SETTING>
NO
PPS
GRADE A-PPS
1
1.563P STD
1.563P STD
2
1.563P STD
1.563P STD
3
1.563P STD
1.563P STD
4
1.563P STD
1.563P STD
5
1.563P STD
1.563P STD
6
1.563P STD
1.563P STD
7
1.563P STD
1.563P STD
8
1.563P STD
1.563P STD
9
1.563P STD
1.563P STD
NEXT PAGE
SHUTTLE<<:BACK
ALARM CH
A-GRADE
ALARM CH
A-GRADE
)
S
H
M
1
", and
ALARM CH
A-GRADE
ALARM CH
A-GRADE
Publicidad
Tabla de contenido
