Mitsubishi Electric DX-TL2500E Manual Del Usuario página 2

Major operations and their functions
Front View
1 2
SPLIT/
SEQUENCE
ZOOM
0
1. ZOOM button
When pressing this button once during single screen
display, the screen is magnified by 100%. In the same
way, pressing the button twice magnifies the screen
by 200% and pressing the button three times magni-
fies the screen by 400%. Pressing a camera number
button (1, 2, 3, or 4) will move the magnification cen-
tre point.
2. SPLIT/SEQUENCE button
Press the button to display SPLIT16, SPLIT9, SPLIT4
screen or SEQUENCE screen setting on multiplexer
functions.
3. Camera number buttons (1 to 16)
Press the button to display the image from the cam-
era connected to this input on to the monitor.
4. SHUTTLE ring
Used to set various menus and search functions,
adjusting the playback speed, and rewinding or for-
warding the recording images.
5. JOG dial
Used to set various menus and search functions,
forwarding or rewinding the image during playback
(field-by-field).
6. REC/STOP button
When pressing this button, recording starts and the
button lights. When pressing the button for more than
1 second, the recording stops and the light turns off.
When pressing this button for more than 1 second
during alarm recording, recording stops. During timer
recording, recording will not stop even if the button
is pressed.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
2
DIGITAL RECORDER DX - TL 2500
ACCESS
OUTPUT B TIMER PRE ALARM M-DET EMERGENCY
8 9 10 11 12
3
10 11 12 13
COM LOCK
13 14 15 16
7. ARCHIVE button
Press the button to archive. When pressing the but-
ton for more than 1second, archive stops. The unit
will not start to archive if an archive device is not
connected to the unit.
8. OUTPUT B indicator
Illuminates when pressing the OUTPUT B button.
9. TIMER indicator
Illuminates during timer recording or timer recording
stand-by.
10. PRE ALARM indicator
Illuminates during pre-alarm recording mode.
11. M-DET indicator
Illuminates when the motion detection function is on.
12. EMERGENCY indicator
Flashes during emergency recording and lights when
recording is completed.
13. ACCESS indicator
Illuminates during access to hard disk drive, Com-
pact Flash Card or peripheral recording devices.
14. COM (COMMUNICATION) indicator
Illuminates when establishing the communication with
personal computer.
15. LOCK button
Pressing it with a pointed object (such as a ballpoint
pen) while the MAIN switch (main power) on the rear
of the unit is on, will activate the simple lock or pass-
word lock. Moreover, the PASSWORD can be set on
the <PASSWORD SETTING> screen. The indicator
will light while the lock is active.
16. LOCK indicator
Illuminates when simple lock or password lock is on.
4 5
CLEAR/
REW
14 15 16
Digital
6 7
ENTER/
FF
REC/STOP
ARCHIVE
Multiplex
Record
&