Klarstein Big Daddy Manual Del Usuario página 14

EN
14
3
Slide the door down,away from the
hinge pin located on the top of the door.
5
To install the bracket on the left side of
the appliance, screw the two screws
through the bracket and into the top of
the appliance.Slide the door back on
to the top hinge. Ensure the door is face
up.Replace the plastic cover on the top
bracket by pressing down until it clicks
into position.
4
Remove the plastic cover from door hinge
first. Then unscrew the two screws from
top bracket and replace on the other
side.
6
Screw the bottom hinge into place on
the new side. Replace the foot on the
other side. Check that the door is aligned
horizontally and vertically and that the
seals are closed on all sides before
finally tightening the bottom hinge.
Readjust the leveling feet.