Installation; Installing The Light - HAMPTON BAY 49956 Guía De Uso Y Cuidado

Installation

Installing the light

IMPORTANT: Prior to use, remove the battery
isolator tag (F) inserted in the battery compartment
and allow it to charge a full sunny day.
NOTE: Do not use a hammer. If the ground is hard,
use water to soften.
□
Insert the ground stake (D) firmly into the ground at the installation location. If the ground is too hard, soak the
ground with water to soften the ground or drive a metal rod or screwdriver into the ground to create a hole for the
ground stake (D).
□
Connect the pole (C) to the ground stake (D).
□
Connect the lamp housing assembly (A & B) to the pole (C).
A
F
B
C
D
4