Double Din Radio Provision - Metra 95-7879 Instrucciones De Instalación

Kit Preparation
Red factory clip
White
plastic
clips
Metal clip
(Figure A)
Kit Assembly 95-7879
Hazard switch
Air bag light

Double DIN radio provision

1. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
2. Slide the double DIN radio into the
brackets and secure the double
DIN radio to the assembly using
the screws supplied with the radio.
(Figure B)
3. Secure the radio housing brackets
to the radio housing with four #8
x 3/8" Phillips screws provided.
White (Figure C)
plastic
clips
4. Reassemble dash in reverse order
of disassembly using the supplied
#8 screw in place of the factory
screw removed in step one,
(Figure B) of the dash disassembly.
3
(Figure A)
(Figure B)