Double Din Radio Provision - Metra 99-7877 Instrucciones De Instalación

Double DIN radio provision

1. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the radio for proper operation.
2. Cut and remove the center bar
from the radio housing. (Figure A)
3. Snap the double DIN brackets
to the inside edge of the radio
housing. (Figure B)
4. Slide the double DIN radio into the
bracket/radio housing assembly
and secure the double DIN radio
to the assembly using the screws
supplied with the radio. (Figure C)
5. Snap the double DIN trim plate
onto the front of the radio/housing
assembly. (Figure C)
6. Re-assemble dash in reverse order
of disassembly.
Kit Assembly
(Figure A)
99-7877
(Figure B)
6
(Figure C)