Double Din Radio Provision - Metra 95-7405 Instrucciones De Instalación

1. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the radio for proper operation.
2. Snap the double DIN brackets to
the inside edge of the double DIN
radio housing. (Figure A)
3. Slide the double DIN radio into the
double DIN bracket/radio housing
assembly and secure the radio to
the radio to the assembly using
the screws supplied with the radio.
(Figure B)
4. Snap the double DIN trim-plate
onto the housing/radio assembly.
(Figure B)
5. Reassemble dash in reverse
order of disassembly.
Kit Assembly 95-7405

Double DIN radio provision

(Figure A) (Figure B)
3