Instructions For Printing Records - Flowonix prometra Manual De Usuario

Instructions for Printing Records

The Prometra Programmer Print Tool allows patient records stored in the Programmer to be retrieved
using a Windows PC and printed on a configured printer.
1. Attach the Prometra Programmer to the round 3 pin serial connector.
2. Open the Prometra Programmer Print Tool application by selecting
"Programmer Print Tool (version ###).exe"
3. The Prometra Programmer Print Tool will open and display three panes (Figure 3):
• Pane 1 – Patients: All patients stored on the connected programmer.
• Pane 2 – Records: All records for the selected patient stored on the connected programmer.
• Pane 3 – Details: The details of the selected record.
4. To print, check the boxes in Pane 2 (Records) next to each record needed. When all desired records are
marked, select "Print". The tool will print one record per page.
5. After printing, verify the intended records were printed using the "Name", "Date", and "Time" that
appear on each hardcopy.
Trademarks are the property of their respective owners.
US and Foreign patents issued and pending. Please consult flowonix.com for the most up-to-date
information.
PROMETRA PROGRAMMER PRINT TOOL, For use with Prometra
Figure 3
Page 3
® Programmer