Closing the dust tank
According to the arrow's direction(30)on
the top of tank handle,please take the hook
into the hole on the handle and close the
dust tank by locking the hook behind it.
(28)
place it again
The motor safety filter should be cleaned at
least once a month.
WARNING
Dry fully for more than 24 hours
in shade.
Cleaning exhaust filter(32)
• The exhaust filter is a reusable HEPA filter
depend on model).
• To clean the exhaust filter, remove it on
the body by releasing hook.
• Dust off filter. (Do not wash filter with water)
• The exhaust filter should be cleaned at
least once a year.
Mini turbine nozzle (optional)(33)
Mini turbine is used for stairs and other
•
hard to reach places.
To clean the mini turbine nozzle,
•
remove the nozzle cover:
Remove 2 screws on the bottom and
take mini turbine nozzle cover off as
shown.
(29)
(31)
- 16 -
Frequently clean and remove hair,
•
string, and lint build-up in the brush
area.
Failure to do so could damage to mini
turbine nozzle.
Turbine Nozzle (depending on
model)(34)
•
Cleaning turbine brush nozzle.
•
Press the button on the rear side of the
nozzle to separate the air cover.
•
Use the dusting brush & crevice tool to
vacuum clean the brush and fan.
Turbine Nozzle (depending on
model)(3
5)
Cleaning turbine nozzle.
•
•
Push the lever outside.
•
Open the cover and put up the brush.
•
Clean the brush and nozzle.
Push the brush into the projection, put
•
down the brush and close the cover.
•
Push the lever inside.
CAUTION
Personal injury hazard .
Always unplug the vacuum cleaning.
•
•
Failure to do so could result in personal
injury.
Do not block up the hole by hand or
•
another object(paper ,fabric ,stockings,
etc) when open the cover.
•
Do not touch the brush when nozzle is
overturned.
Do not touch the brush because the brush
•
is so hot after turning off the vacuum cleaner.