Other Connections - LG 32LT340HBDB Guía Rápida De Configuración

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

• Remove the stand before installing the TV

on a wall mount by performing the stand

attachment in reverse.

• For more information of screws and wall

mount bracket, refer to the Separate

purchase.

• If you intend to mount the product to a wall,

attach VESA standard mounting interface

(optional parts) to the back of the product.

When you install the set to use the wall

mounting bracket (optional parts), fix it

carefully so as not to drop.

• When mounting a TV on the wall, make sure

not to install the TV by hanging the power

and signal cables on the back of the TV.

• Do not install this product on a wall if it

could be exposed to oil or oil mist. This may

damage the product and cause it to fall.

• When installing the wall mounting bracket, it is

recommended to cover the stand hole using tape,

in order to prevent the influx of dust and insects.

(Depending upon model)

Stand hole

Connections

You can connect various external devices to the TV.

For more information on external device's connection,

refer to the manual provided with each device.

Antenna/Cable

Connect an antenna, cable, or cable box to watch

TV while referring to the following. The illustrations

may differ from the actual items and an RF cable is

optional.

• Make sure not to bend the copper wire of the RF

cable.

Copper wire

• Complete all connections between devices, and

then connect the power cord to the power outlet to

prevent damage to your TV.

• To improve the picture quality in a poor signal area,

purchase a signal amplifier.

• Use a signal splitter to use 2 TVs or more.

• If the antenna is not installed properly, contact your

dealer for assistance.