b) Dry it up
c) Dip a few drops of engine oil on it
d) Squeeze out excess oil
Put the filter element back to its original place, mount the cover and fasten it
securely (Figure 19)
3.4 Battery (For Electrical Start Models only)
3.4.1 Check the battery and connecting ports.
3.4.2 Check each cell of the battery to see if the electrolyte level of the battery is
between the upper and lower level marked on the battery. (Figure 20)
1. Upper Level
2. Lower Level
3.4.3 Check the specific gravity of electrolyte
Fig 19
Fig 20
10