Nogueira EN-9F3B Manual De Instrucciones página 14

Electric motor actuation (continuation)
INTERNAL
SHIELD
3- Install the internal shield and replace the
machine pulley.
BELTS
4- Install the belts and align the pulleys. Fasten
the motor to the bracket rails.
14
MACHINE
PULLEY
fig.16
5- Estique as correias utilizando o esticador
existente no cavalete. Coloque a blindagem
externa das correias.
STRETCHER
fig.17
Use the existing nuts on the two threaded bars to
adjust the stretcher course.
Note: Pulleys and belts: Consult this topic in
"TECHNICAL CHARACTERISTICS" on this
manual.
Instruction manual
EXTERNAL
SHIELD
ADJUSTMENT
NUTS
fig.18
fig.19