Cutting Sizes: En-6180, En-6400, En-6500, En-6600, En-6700F4 - Nogueira EN-9F3B Manual De Instrucciones

Cutting sizes: EN-6180 / EN-6400 / EN-6500
EN-6600 / EN-6700F4
Ensiling machines series 6000, models EN-6180 / EN-6400 / EN-6500 / EN-6600, and EN-6700 F4,
the cutting sizes are defined by positioning the pulley belts, as displayed in the following figures.
CUTTING OPTIONS:
How to change the cutting setting (models: EN-6180 / EN-6400 / EN-6500 / EN-6600 / EN-6700F4):
1- Remove the belt cover A.
2- Remove the 4 screws B fastening the transmission gearbox.
3- Remove the stretcher screw C.
4- Change the pulley belt track.
5- Stretch the belt using the screw stretcher C.
6- Retighten the 4 screws B fastening the transmission gearbox.
7- Replace the pulley belt cover A.
fig.40
SILAGE CHOPPERS
fig.39
fig.40A
21