Faults Diagnosis - Telstar TDH030110MD Manual De Instrucciones

3.Store the unit
When not using the unit for long time periods
-After turning off the unit, wait one day before emptying the bucket.
-Clean the main unit, bucket and air filter.
-Wrap the cord and bundle it with the band.
-Cover the unit with a plastic bag.
-Store the unit upright in a dry, well-ventilated place.

FAULTS DIAGNOSIS

Please check the machine according to the following form before asking for maintenance:
Faults Diagnosis
Unit does not start
Dehumidifier does not dry the air as it should
CAUTION: DO NOT operate the dehumidifier without
a filter because dirt and lint will clog it and reduce
performance.
-Make sure the dehumidifier s plug is pushed completely into the outlet.
-Check the house fuse/circuit breaker box.
-Dehumidifier has reached its preset level or bucket is full.
-Bucket is not in the proper position.
-Did not allow enough time to remove the moisture.
-Make sure there are no curtains, blinds or furniture blocking the front or
back of the dehumidifier.
-The humidity selector may not be set low enough.
-Check that all doors, windows and other openings are securely closed.
-Room temperature is too low, below 5°C(41°F).
-There is a kerosene heater or something giving off water vapor in the
room.
26
DEHUMIDIFIER
TDH030110MD
What to check