Safety Warnings And Precautions; Installation Warnings - Nice For-Max A XM0900003 Instrucciones Y Advertencias Para La Instalación Y El Uso

ENGLISH
Notes to manual consultation
Some figures referred to in the text are provided at the
end of the manual.
1
SAFETY WARNINGS AND
1
PRECAUTIONS
1.1 - Safety warnings
• CAUTION! – Important safety instructions. For
personal safety, it is important to follow these
instructions. Improper installation may cause se -
rious injury.
Carefully read the instructions before you star
working. If in doubt, ask for clarification from Nice
Technical Service.
• CAUTION! – Keep these instructions for future
maintenance work and disposal of the product.
• CAUTION! – All installation, connection, pro-
gramming and maintenance operations must be
performed exclusively by suitably qualified and
skilled personnel in observance of local legisla-
tion, standards and regulations and the instruc-
tions in this manual.

1.2 - Installation warnings

• Before installation, ensure that this product is suitable
for automation of your shutter (read paragraph 3.1).
• All product installation and maintenance operations
must be performed with the automation disconnect-
ed from the power mains. As a precaution, before
starting work, affix a notice on the disconnect device,
with the text "CAUTION! MAINTENANCE IN PRO -
GRESS" on the disconnect device.
• Before starting installation operations, move all un -
necessary cables away from the area; also deactivate
any mechanisms not required for motor-powered
operation of the shutter.
• If the tubular motor is installed at a height of less than
2.5 m from the floor or other support surface, the
moving parts must be protected with a suitable cov-
ering, to avoid inadvertent access. To fit such a pro-
tection, refer to the shutter instruction manual, and
English – 1