Mains Cable; Electrical Requirements; Product Overview (01); Symbols On The Appliance - AL-KO LSH 4 Traducción Del Manual Original De Instrucciones

GB
2.3.2

Mains cable

WARNING!
Risk of injury from elec-
tric shock
A defective mains cable
can result in serious injur-
ies due to electric shock.
■
Ensure that the mains
cable is not damaged or
severed.
■
Use only rubber-sheathed cables of quality
H07RN-F according to VDE 0282 Part 14
with a conductor cross section of at least
2.5 mm².
■
The maximum permissible cable length is
10 m. A longer cable impairs the motor power
and hence the performance and function of
the log splitter.
■
Mains cable, mains plug and coupling socket
must be undamaged. A defective mains
cable (e.g. with cracks, cuts, crushed or
kinked points in the insulation) must not be
used.
■
Repairs to the mains cable, mains plug and
coupling socket may only to be carried out by
qualified electricians.
■
Do not expose plug connectors to moisture.
■
If the mains cable is damaged, immediately
disconnect it from the mains.
2.4

Electrical requirements

■
AC 230 V/50 Hz
■
Minimum cross-section of the mains cable =
2.5 mm²
■
Minimum fusing of mains connection = 16 A
2.5

Product overview (01)

The log splitters LSH 4 and LSH 6 consists of the
following components:
No. Component
1 Control lever
2 Guard plate
3 Log pusher
4 Log guide plate
28
No. Component
5 Splitting wedge
6 Transport bracket
7 Piston rod
8 Pedestal
9 Electric motor
10 ON button
11 Mains cable
12 Wheel
13 Front leg (LSH 6 only)
14 Pedestal (LSH 6 only)
15 Longitudinal strut (LSH 6 only)
16 Cross-strut (LSH 6 only)
17 Rear leg (LSH 6 only)
2.6

Symbols on the appliance

Symbol Meaning
Read the operating instructions be-
fore starting operation!
Wear protective glasses!
Wear protective gloves!
Wear safety boots!
Keep your hands away from the
danger area!
Place logs into the log splitter and
do not hold!
Do not touch moving parts!
Keep third parties away from the
danger area!
Product description
LSH 4 | LSH 6