Electrical Safety; Use And Handling Of The Electrical Tool - AL-KO LSH 4 Traducción Del Manual Original De Instrucciones

Safety instructions

3.6 Electrical safety

■
The connection plug of the
appliance must fit into the
socket. The plug is not al-
lowed to be changed in any
way. Do not use any plug
adapters together with
earthed appliances. Unmodi-
fied plugs and matching sock-
ets reduce the risk of electric
shock.
■
Avoid physical contact with
earthed surfaces such as
on pipes, heaters, cookers
and refrigerators. There is
an increased risk of electric
shock if your body is earthed.
■
Keep electrical tools out of
the rain and away from
moisture. Water getting into
an electrical tool increases the
risk of an electric shock.
■
Do not use the cable for in-
correct purposes such as
carrying the electrical tool,
hanging it up or for pulling
the plug out of the socket.
Keep the cable away from
heat, oil, sharp edges or
moving parts of the equip-
ment. Damaged or tangled
cables increase the risk of an
electric shock.
442309_a
■
If you are working outside
with a power tool, only use
extension leads that are
also suitable for outside.
Using an extension lead that
is suitable for outside de-
creases the risk of electric
shock.
■
If the operation of the power
tool in a humid environment
cannot be avoided, use a
fault current circuit breaker.
Using a fault current circuit
breaker decreases the risk of
electric shock.
3.7 Use and handling of the
electrical tool
■
Do not overload the appli-
ance. Use the appropriate
electrical tool for the job
you are doing. Using the ap-
propriate electrical tool will en-
able you to work more effect-
ively and safely in the spe-
cified performance range.
■
Do not use an electrical tool
if it has a defective switch.
An electrical tool that can no
longer be switched on or off is
dangerous and must be re-
paired.
31