Publicidad
Idiomas disponibles
Idiomas disponibles
Be extremely cautious as oil and fat preparations might catch
fire if overheated.
If you use the appliance under a cooking hob, make sure to
respect the minimum distance advised by the manufacturer.
Unplug the appliance immediately if you notice a crack in the
oven door and have it repaired by a competent qualified
electrician(*).
Your appliance must never be switched on through an
external timer or any kind of separate remote control system.
The temperature of the accessible surfaces, such as the
door of the oven, may be very high when the appliance is
in use. Never touch those surfaces during use nor before
the appliance has totally cooled down, and only handle
the knobs.
The symbol
temperature, however the other metallic or non-metallic surfaces
can also become very hot during use and it is therefore advisable
to always handle them with care and if possible with the help of
isothermal gloves or other thermal protection. In case of doubt
concerning the temperature of a certain surface it is always
preferable to protect oneself.
(*) Competent qualified electrician: after-sales department of the
producer or importer or any person who is qualified, approved
and competent to perform this kind of repairs in order to avoid all
danger. In case of need you should return the appliance to this
electrician.
SHORT CORD INSTRUCTIONS
A short power supply cord is provided to reduce the risk resulting from becoming
entangled in, or tripping over a longer cord. Extension cords may be used if care is
exercised in their use.
The electrical rating of the extension cord should be at least 16 ampere. An
extension cord of less than 16 ampere could overheat and get damaged.
The longer cord should be arranged so that it will not drape over the counter top or
tabletop where it can be pulled on by children or tripped over.
is always put on the surface with the highest
5
TKG OT 1033 BCRL
Publicidad
