Ezviz CS-W6-SD05GP Guia De Inicio Rapido página 6

Name
Power Indicator
Uplink Interface
PoE Interface
Long Distance Switch
Power Input
Wiring
1. Connect the uplink interface of your switch to the LAN interface of the router via network cable.
2. Connect the PoE interface of the switch to an internet PoE device via network cable.
Description
• On: The device is powered on.
• Off: The device is powered off or device exception.
Connect it with the Uplink network or the LAN interface of router.
Four-port PoE switch and eight-port PoE switch are available.
Please connect an important device or network with the red PoE interface.
Use CAT5E-UTP network cable for long distance. When this function works, the max. data
transmission distance and power supply distance will reach 250 m, and the transmission
bandwidth of the single network interface will be reduced to 10Mb.
Use the power adapter included. For the PoE Switch, please use 48V power supply; for the
non-PoE Switch, use 12V power supply.
For PoE Device
For LAN
For PoE Interface
2
For Uplink