Warning; Introduction; Technical Details - Elcometer SAGOLA 4600 XTREME Manual De Instrucciones

01. Warning

Before starting the unit you must read, take into consideration and comply with all the
indications described in this Manual.
This manual must be kept in a safe place, accessible to all users of the unit.
The unit must be started and handled exclusively by personnel instructed in its use and must be
employed only for the purpose for which it was designed.
Likewise, accident prevention standards, regulations, work centre directives and current legisla-
tion and restrictions must be taken into consideration at all times.
The logotypes of SAGOLA and other SAGOLA products mentioned in this manual, are registered
trademarks or brand names of the company SAGOLA S.A.U.

02. Introduction

This unit belongs a the family of devices designed to spray products with compressed air with a
spray gun, providing a high level of product transfer (T > 65%) and excellent quality finish, as well
as low levels of contamination.
The equipment consists of the following:
• Spray gun
• Accessory wrench
• Cleaning brush
• Instruction manual
• Case

03. Technical details

Unit with product-feed by gravity (hereinafter the Gun)
with Tip and Air Nozzle of the type described in the packaging.
Product cup:
• 0.65 litres made of plastic, with non-drip cap and device to catch any spilt product..
• 1 litre in metal with lid.
ir input pressure: maximum 8 bar
Net weight:
Digital version with cup...............................................................................................................706 g.
Digital version and metal cup......................................................................................................763 g.
Analogue Version (With pressure gauge)....................................................................................813 g.
Version without pressure gauge (with internal flow regulator) with cup....................................670 g.
Version without pressure gauge (with internal flow regulator) and metal cup..........................731 g.
Connection for compressed air hose, threaded, male BSP 1/4"x19hp
Maximum operating temperature from 0 - 60
Recommended working pressure not in excess of 2.2 bar, except HVLP version, 1.8 bar (mea-
sured at the air inlet and recorded in this).
Air consumption according to Tip Table.
ATEX Normative
(*) Non electric gun in explosion hazard areas (ATEX) must have the earthing connections
and/or static-free feed hoses.
o
C (except digital version, 0 - 50
- Electric equipments:
- Non electric equipments:
ENGLISH
o
C)
II 2G Ex ia IIC T4 Gb
II 2G T4 x (*)