22. Conformity Declaration
Manufacturer:
Address:
Hereby declares that the product: AEROGRAPHIC SPRAY GUN
Brand:
Range:
Product line:
CE Conformity declaration
In accordance with the Esential Security Provisions on the Annex of the Directive 2014/34/UE
and it can be used in potentially explosive atmospheres (ATEX).
The product conforms with the standards:
• Directive of machines (2006/42/CE) and the corresponding transposition into national law
1644/2008.
• EN 1953:2013 - Atomising and spraying equipment for coating materials. Security requirements.
• UNE EN-1127-1:2012. Prevention and protection against explosion. Part 1: Basic concepts
and methodology.
These also meets the following Directive and Regulations:
ATEX Directive (Directive 2014/34/CE)
Protection Level II 2G Suitable for use in Zones 1 and 2
"X"marking. The equipment must be connected to ground. All static electricity is discharged
through air pipes. The air hoses must be "STATIC-FREE"
UNE EN ISO 80079-36:2017 - Non electrical equipment used for potentially explosive atmospheres.
UKCA Conformity declaration
In accordance with the Esential Security Provisions on the Annex of the Directive
2016 No1107 and it can be used in potentially explosive atmospheres (ATEX).
The product conforms with the standards:
• Directive of machines (2008 No 1597).
• BS EN 1953:2013 - Atomising and spraying equipment for coating materials. Security require-
ments.
• BS EN-1127-1:2012. Prevention and protection against explosion. Part 1: Basic concepts and
methodology.
These also meets the following Directive and Regulations:
ATEX Directive (Directive 2016 No 1107)
Protection Level II 2G Suitable for use in Zones 1 and 2
"X"marking. The equipment must be connected to ground. All static electricity is discharged
through air pipes. The air hoses must be "STATIC-FREE"
BS EN 80079-36:2016. Explosive atmospheres. Non-electrical equipment for explosive atmos-
pheres. Basic method and requirements.
Full technical documentation and service instructions are available for 10 years.
In Vitoria-Gasteiz on 01/09/2021
SAGOLA, S.A.U.
Urartea, 6 • 01010 VITORIA-GASTEIZ (Álava) SPAIN
SAGOLA
4600
4600 Xtreme
II 2G T4 x
II 2G T4 x
ENGLISH
Signed:
Enrique Sánchez Uriondo
Technical Manager