46/47
21. US Approvals
Approval for SCAQMD Rule 1151:
4600 Xtreme Paint spray gun is approved for operations subject to South Coast
Air Quality Management District Rule 1151(d)(6)(A)(v), Motor vehicle and mobile
equipment non assembly line coating operations.
All versions of 4600 Xtreme spray guns sold or distributed for use within the jurisdiction of the
SCAQMD, or HVLP mandated areas within the USA subject to Rule 1151.
Shall be attached the RC1 mechanical pressure gauge (Industrial Model No. 200100036) or
digital pressure gauge (Patent Model No. 559018) and be in good working condition.
The Sagola RC1 air flow regulator with analog pressure gauge must be connected to the gun,
except in the digital versions that have the digital pressure gauge integrated into the body of the
spray gun, with a maximum working pressure at the inlet that cannot exceed 29 psi (2 bar).
RC1 air flow regulator
with analog pressure gauge
For your commercial reference, see the chart below.
Air flow
regulator RC1
Digital gauge
Bar
Digital gauge
psi
Industrial
Commercial
model
reference
200100036
56418020
56418442
559018
56418559
ENGLISH
Digital pressure gauge
4600
4600
Xtreme
Xtreme digital