Before You Start; Function Settings - Cooke & Lewis CL60CGRF Manual Del Usuario

Use
Utilizare

Before you start

WARNING: Read the instructions before using the appliance.
Switch on the appliance at the switched fused connection unit. The appliance is ready for use.
Function & Settings
01 Four-button panel
To obtain the best results from your cooker hood it is recommended that you leave it switched on for
up to 15 minutes after you have fi nished cooking.
Light On/Off
Fan On/Off and Speed Reduction
LED Display
Boost Function and Speed Increase
Timer
To Set Up For First Use
Ducted Option
Recirculation Option
To change to this option, press both Speed icons
Press the Speed Increase
to revert back to the Ducted Option
to confi rm the change and the Timer
NOTE: This operation must be undertaken within two minutes of switching the power on
at the mains outlet. To change this setting at a later time, switch off the power at the mains
outlet, wait a few seconds, turn on the power and repeat the above.
Utilisation
Uso
This is the factory default setting if you are extracting air to the outside.
This is the option to be used with carbon fi lters.
to change to the Recirculation Option
. Finally, press both Speed icons
will stop fl ashing.
Benutzung
together and the Timer
and the Speed Reduction
together one more time
29
will fl ash red.