Before You Start; Function Settings; Touch Control Panel; Setting The Fan Speed - Cooke & Lewis CLDHB90 Manual Del Usuario

Use
Utilizare

Before you start

WARNING: Read the instructions before using the appliance.
Switch on the appliance at the switched fused connection unit. The appliance is ready for use.
Function & Settings
01

Touch control panel

Using the hood
1. Press the power button on the control panel for two seconds, there will be a beep and the hood
will elevate automatically and switch on the fan motor and the light.
2. If no further keys are pressed within 5 seconds the hood will enter standby mode.
3. If you touch the power button again during elevation this will stop the hood moving but the fan
motor will continue to operate.
4. Press the power button for two seconds to stop the motor and return the hood to its housing.
Timer Light
Timer Light
02

Setting the fan speed

1. Touch the speed button "
2. Slide or touch the slider control to set the fan speed from 1-4 as follows:
Segments 1/2
Speed 1
ATL10380 000000041_28A 90CM Down Draft Hood 3mm R.indd 30
Utilisation
Uso
Slide control
Slide control
" to turn the fan motor on and off. The button will flash.
Segments 3/4
Speed 2
Benutzung
Kullanım
Speed
Speed
Segments 5/6
Speed 3
30
Power
Power
Segments 7/8
Speed 4
10/05/2017 19:36