Zoeller 2701 Manual De Instrucciones página 6

INSTALLATION INSTRUCTIONS
4. Install rigid 1-1/4 in. discharge pipe (not included)
according to local, regional, and state codes.
5. Use a 2-step PVC glue system (not included) to join
pipe and any fittings needed.
6. Attach the switch securely to the discharge pipe so
that incoming water does not interfere with switch
movement. The best place for the 'off' point is above
the motor housing and 180° from the inlet. Never put
the 'off' point below the pump discharge.
4
5
6
6
Discharge
Pipe
Incoming
water
Switch