Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
• The appliance should be disposed of accor-
ding to Regulation 2002/96/EC-WEEE (Waste
Electrical and Electronic Equipment). In case
of queries, please contact the municipal authorities
responsible for waste disposal in your area.
3. Unit description
1. Display
2. Memory button MEM
3. START
4. Battery cover
5. Wrist cuff
6. mmHg unit
7. Pulse icon
Icons in the display:
1. Time and date
2. Systolic pressure
3. Diastolic pressure
4. Measured pulse
5. Number of memory space
6. Inflate/deflate arrow
7. ‚Change battery' icon
8. Cardiac arrhythmia icon
9. WHO classification
1
4
7
5
7
1
5
8
9
4
6
4. Prepare measurement
Inserting battery
• Remove the battery cover (left side of the unit).
• Insert two 1.5 V micro batteries (alkaline, type LR
03). Make absolutely sure that you insert the batte-
ries with the correct polarity as marked. Do not use
rechargeable batteries.
• Replace the battery cover carefully.
2
• Replace the battery cover carefully.
If the ‚change battery' icon
surement is no longer possible and you must replace
all the batteries.
3
Note: You will find these markings
on batteries containing harmful sub-
6
stances: Pb = battery containing lead,
Cd = battery containing cadmium,
Hg = battery containing mercury.
Setting date and time
It is vital to set date and time. Only in this way is it
2
possible to save and subsequently retrieve your mea-
sured values with the right date and time.
3
Time is shown in 24 hour format.
Note: If you hold down ‚MEM', you can set the values
faster.
13
is displayed, mea-
Pb
Cd
Hg
Publicidad
Tabla de contenido
