Sanitas SBC 41 Instrucciones Para El Uso página 15

• You can interrupt measurement at any time by pres-
sing the ‚START' button.
• ‚Er_' appears if it has not been possible to perform
the measurement properly. Observe the section in
these instructions on error messages/troubleshoo-
ting and repeat the measurement.
• The test result is saved automatically.
Evaluating results
Cardiac arrhythmia:
This instrument can identify possible cardiac arrhyth-
mia disorders during measurement and if necessary
indicates the measurement with the flashing icon
This may be an indicator for arrhythmia. Arrhythmia is
a condition where the heart rhythm is abnormal as a
result of defects in the bioelectrical system controlling
the heart beat. The symptoms (omitted or premature
heart beats, slow or excessively fast heart rate) may
be caused, among other things, by heart disease, age,
physical predisposition, excessive use of stimulants,
stress or lack of sleep. Arrhythmia can only be ascer-
tained through examination by your doctor.
Repeat the measurement if the flashing icon
displayed after the measurement. Please note that you
should rest for 5 minutes between measurements and
not talk or move during the measurement. If the icon
appears often, please contact your doctor. Any
self-diagnosis and treatment based on the test results
may be dangerous. It is vital to follow your doctor's
instructions.
.
WHO classification:
According to WHO Guidelines/Definitions and the
latest findings, the test results can be classified and
evaluated according to the following chart:
15
is