Kohler K-9674 Guia De Instalacion página 5

Install the Handshower (cont.)
Fasten swivel mounting bracket to handshower with gasket
(supplied).
Vacuum Breaker Installation
To prevent possible back siphoning, a vacuum breaker may be
attached to the shower arm, wall elbow, diverter valve at
showerhead, or to bath spout side outlet.
The hose coupling is fastened to the male end of the vacuum
breaker.
2. Installation Checkout
Ensure that all connections are tight.
Open the drain.
Turn on the main water supply and check for leaks. Repair as
needed.
Open both hot and cold valves and run water through the spout
(if installed) to remove debris. Check for leaks.
Turn the valves off.
Kohler Co. 5 105700-2-A