Inserting Batteries; Attaching The Ef-42; Auto Power Off - FujiFilm EF-42 El Manual Del Propietario

Inserting Batteries

The EF-42 can be used with lithium, alkaline, and nickel-metal hy-
dride (NiMH) batteries. Choose NiMH batteries for reduced fl ash
charging times and longer battery life.
1 Place your thumb in the depression at the
top of the cover and push the cover slightly
in to release the latch, then slide the cover
down to open it.
Q Before opening the cover, be sure the ON/OFF
switch is in the OFF position.
2
Insert four AA batteries in the orientation
shown on the inside of the cover. Close the
cover.
Q Although the battery chamber is designed to
prevent the batteries being inserted incor-
rectly, failure to insert the batteries in the cor-
rect orientation could result in malfunction.
3
Turn the fl ash on. A beep will sound as the
fl ash starts charging. The fl ash is ready for
use when charging is complete and the
ready lamp lights.
4 Turn the fl ash off . The ready lamp will turn
off to show that the fl ash will not fi re.
Q Turn the fl ash off before mounting it on the hot shoe. If the fl ash is on, it
may short the hot shoe contacts, causing the fl ash to fi re unexpectedly or
other product malfunction.

Attaching the EF-42

Be sure the EF-42 is off before mounting it on or removing it from the
camera. Failure to observe this precaution could result in damage to
the camera.
1 Rotate the fl ash lock ring to the right to release the lock.
2 Mount the fl ash securely on the camera hot shoe.
3 Rotate the lock ring to the left to lock the fl ash in place.
Q Be sure the release the lock before attaching the fl ash. Attempting to at-
tach the fl ash without releasing the lock could damage the hot shoe.

Auto Power Off

If no operations are performed for 15 minutes while the fl ash is on,
the displays will turn off and the fl ash will be disabled. Normal opera-
tion can be restored by pressing the camera shutter button halfway
or turning the fl ash off and then on again.
R The fl ash continues to draw power from the batteries after the displays
have turned off automatically. To reduce the drain on the batteries, turn
the fl ash off when it is not in use.
ENGLISH
EN-6