Wall Mount Installation - Christie QuadHD84 Guia De Inicio Rapido

Connect the RS-232C cable as shown in the illustration.
* The RS-232C protocol is used for communication between the PC and display.
You can turn the display on/off or adjust the OSD menu from your PC.
RS-232C cable
(not included)
PC
Place the display on a clean, dry, lint-
free cloth on a flat surface and attach
the wall mounting bracket (with VESA
FDMI compliant mounting interface):
Handle
Daisy Chain Connection
IN OUT
Display 1

Wall Mount Installation

I NPUT
M ENU
VOL
VOL
IN OUT IN
Display 2 Display 3
Attach the display to the wall according to
the mounting bracket's instructions.
The length of the screw should exceed the
thickness of the wall mounting bracket by
at least 16mm.
Recommended torque: 470 – 635 N-cm
Handle
Bracket (WxH):
600x400 mm
Screw type: M8
Mount holes: 4
7
OUT IN OUT
Display 4
Thickness ff the
all mounting
Display
bracket
16mm
(0.63")
QuadHD84 Quick Start Guide
020-000672-01 Rev. 1 (10-2013)