Front Panel - SWR Sound Strawberry Blonde II Instrucciones De Funcionamiento

Congratulations! Your new Strawberry Blonde™ II
delivers the famous SWR® tone, clarity and true full-
range response that has made SWR® the choice of
professionals for over twenty years. We sincerely thank
you for stepping up to SWR®, and remain committed to
helping you Amplify Your Future™
A . MUTE—Disables all audio output except TUNER
OUT {Q}, and HEADPHONES {L}, useful for instrument
changes, tune-ups and when using headphones.
The LED indicates when MUTE is on.
B . INPUT—
Plug your guitar into this jack using
a shielded instrument cable.
C . LOW Z BALANCED—Press in to configure the
INPUT circuit for low-impedance, balanced-output
guitars (such as the Taylor Expression System™). A
balanced connection offers superior dynamic range
and noise immunity. Use only with a TRS
cable and a balanced output guitar.
6
Strawberry Blonde II
Strawberry Blonde II™
Same great tone, new upgrades & features!
• NEW upgraded power amp
• NEW Low Z ¼" balanced input option
• NEW Tuning Mute switch
• 90 watts
• 1x10 enclosure w/ tweeter
• Classic SWR acoustic preamp w/ Aural Enhancer™
• 3-band active EQ & phase reverse switch
• Spring reverb
• Headphone jack
• Side-chain effects loop
• 5-Year transferable limited electronic warranty
Optimize this SWR product with:
• SWR Baja Blonde™ extension cabinet

Front Panel

D . GAIN—Adjusts the preamp signal level. Use in
E . CLIP—Indicates when the preamp, tone circuits or
◊
conjunction with the CLIP LED {E} to set the optimal
signal-to-noise ratio. GAIN is also the primary level
control for the BALANCED LINE OUTPUT {R} and
EFFECTS SEND {S} jacks on the rear panel and can
be used to accomodate the input sensitivity of
external equipment, if necessary.
output buffer are overdriven (cliping) and causing
signal distortion. For the cleanest signal, set GAIN
{D} so that the CLIP LED barely flashes at your
instrument's peak output level.
◊