Axxess AXRC-GMLN3 Instrucciones De Instalación página 4

Installing the AXRC-GMLN3
1. With all connections completed reconnect the negative battery terminal.
2. Plug the AXRC-GMLN3 into the vehicle and into the radio.
3. To initialize the interface, turn the ignition on and wait for 30 seconds, then turn the
ignition back off, and on again.
Testing the AXRC-GMLN3
1. Turn the ignition on then turn the radio on and test for proper balance
and fader operation.
2. Close all the doors then turn the key off. The radio should stay on until the
driver's door is open.
AXRC-GMLN3
4