Setting Up The Tv With Your Pc - Samsung LN-T4081F Instrucciones Del Propietario

Setting up the TV with your PC

How to Auto Adjust
Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives.
The function also automatically ine-tunes the settings and adjusts the frequency values and positions.
This function does not work in DVI-Digital mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
Press the ▲ or ▼ button to select "PC", then press the ENTER button.
Change to the PC mode first.
2. Press the ▲ or ▼ button to select "Auto Adjustment", then press the ENTER button.
Press the EXIT button to exit.
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning
alone, then make the vertical frequency adjustments on your PC and fine tune again. After the noise has been reduced,
re-adjust the picture so that it is aligned on the center of the screen.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
Press the ▲ or ▼ button to select "PC", then press the ENTER button.
Change to the PC mode first.
2. Press the ENTER button to select "Image Lock".
3. Press the ▲ or ▼ button to select "Coarse" or "Fine", then press the ENTER button.
Press the ◄ or ► button to adjust the screen quality.
Vertical stripes may appear or the picture may be blurry.
Press the ENTER button.
Press the EXIT button to exit.
English - 46
TV Setup
▲More
Blue Screen : Off
Melody : Medium
PC
Home Theater PC : Off
: In Watching TV ►
Light Effect
Energy Saving : Off
▼ More
Move Enter
TV PC
Image Lock
Position
Auto Adjustment
Image Reset
Move Enter
Auto Adjustment in Progress. Please Wait
TV PC
Image Lock
Position
Auto Adjustment
Image Reset
Move Enter
TV Image Lock
Coarse
Fine
Move Enter
▲
Coarse
▼
Move Adjust
►
►
►
►
►
Return
►
►
►
►
Return
►
►
►
►
Return
50
0
Return
50
Return