Changing The System Standby Timeout; Performing A System Reset - Bose WAVE RADIO III Guia Del Usuario

P Y W
ERSONALIZING OUR
Changing the system
standby timeout
1. Press and hold Alarm Setup (Menu)
until -SETUP MENU- is displayed.
2. Press Tune/Playlist
until AUTO OFF- is displayed.
3. Press Time – or Time + to select NO
or YES.
4. Press Alarm Setup (Menu) to exit
the setup menu or wait 10 seconds for
the setup menu to exit automatically.
18 – English
® R III
AVE ADIO
>
eight times

Performing a system reset

If you wish, you can restore your Wave
original factory settings.
Note: A system reset erases all saved presets.
1. Press and hold Alarm Setup (Menu)
until -SETUP MENU- is displayed.
2. Press Tune/Playlist
until
RESET ALL- NO is displayed.
3. Press Time – or Time + to change
RESET ALL- NO to RESET ALL-
YES.
4. When PRESS PRESET 3 TO CON-
FIRM appears on the display, press
Presets 3. When the reset is com-
plete, DEFAULTS RESET is dis-
played.
5. Press Alarm Setup (Menu) to exit
the setup menu or wait 10 seconds for
the setup menu to exit automatically.
radio III to the
®
>
nine times