Publicidad
Idiomas disponibles
Idiomas disponibles
GB
To set the stamp wheels Fig.
A
Press the handle
travel, then while still holding it.
Press and hold button
A
Allow the handle
the handle locks in place.
You will be able to move the stamp wheels
D
freely with the stylus
In order to return to the print position,
simply push down on handle
You can easily place the date or the number one
position further!
(Not valid for the stamp Model 75.)
Press the switch button
This applies to the stamp D28N:
To automatically place the number one
position further in every stamping process,
rotate the rotary switch
To insert the inkpad Fig.
Handle with caution to avoid dirt from ink!
Press the handle
A
travel, then, while still holding it.
B
Press the button
continue to hold it.
A
Allow the handle
handle locks in place.
Unpack the inkpad carefully.
Squeeze the grips
inkpad and hold them.
1
2
+
to the bottom of its
B
on the front plate.
to move upwards until
C
.
A
.
F
once.
E
90°.
1
4
+
to the bottom of its
on the front plate and
to move upwards until the
on the back of the
J
Resting the back of the ink pad inside the
3
+
pad cradle slide the pad into the slot
the stamp.
In order to return to the print position,
simply push down on handle
To park the stamp Fig.
To prolong the life of the inkpad,
park the stamp!
Press and hold button
Gently push handle
stamp clicks & locks in a raised position.
In order to return to the print position,
simply push down on handle
GB
I
A
.
5
B
on the front plate.
A
downwards until the
A
.
of
Publicidad
