LIMIT 1001HV Manual Del Usuario página 2

Limit 1001 HV
Cross Line Laser with one horizontal and one vertical line. The vertical line reaches 115 degree
up over your head. Magnetic damping compensator. Mode switch for separate lines or off self
leveling to show a sloping line. Mechanical locking for prevent vibrations.
Contents : Laser, Multi function bracket for assembling on wall or on a tripod, target plate, soft
bag, batteries and manual.
Safety. Do not stare into the laser beam or view directly with optical instruments. It can cause
devastating damage to your eyes. Place never instrument at eye level.
Care and Handling. This is a precision instrument and must be treated accordingly. Avoid
impact, dropping and vibration. Push switch/locking key Off during transport. Use and store the
instrument within the specified temperature range. Remove the batteries if the laser should not be
used for a long time. Clean with a soft, dry cloth.
Specification :
2 pc laser diodes class 2M, 15 mw 635 nm.
Self leveling range
Accuracy
Protected class
Battery
Operation time
Operation temperature
Thread
Dimension
Weight
Start. Slide the key, placed on front side to the right.
Off. Slide the switch/locking key to the left.
Toggle Horizontal-Vertical-Horizontal/Vertical-Self leveling Off. The laser line will be off
if the laser is tilted beyond self-leveling range.
Pulse Signal. For outdoor or bright environments with laser receiver (Optional). Laser
Receiver lines indicate visual and audible signal. Range 35 meters.
Battery. Battery cover is placed on the back side.
± 3⁰
mm ± 3 mm/10m
IP 54
3 pc type AA
Hour 10
-10...+50
⁰C
1/4"
mm 90x90x65
gram 365
2
English