Starting Up The Product; Servicing The Product - Grundfos PowerAdapt Instrucciones De Instalación Y Funcionamiento

8. Starting up the product

RSI needs to be configured according to the installed motor and
pump. See the installation and operating instructions for RSI.
Check that RSI with the motor and the pump operates according to
the specifications.

9. Servicing the product

WARNING
Electric shock
Death or serious personal injury
‐
Switch off the power supply before you start any work
on the product. Make sure that the power supply
cannot be switched on accidentally.
‐
After power off, wait the amount of time stated on the
label on RSI before you start any work on the
product. For more information, see the installation and
operating instructions for RSI.
‐
All electrical connections must be carried out in
accordance with the separate wiring diagrams
delivered with the system.
1. If the product is faulty, see the installation and operation
instructions for MP 204 and RSI.
2. If the problem persists, contact Grundfos.
net.grundfos.com/qr/i/96650480
MP 204 I&O.
net.grundfos.com/qr/i/98464145
RSI I&O.
net.grundfos.com/qr/i/99116147
RSI advanced I&O.
11