Mechanical Installation; Mounting The Product; Operation - Grundfos PowerAdapt Instrucciones De Instalación Y Funcionamiento

5. Mechanical installation

5.1 Mounting the product

The product is designed to be mounted on a flat and vertical
surface. The cable glands must face downwards.
To ensure sufficient ventilation, allow at least 200 mm
(5.9") of space on either side of the cabinet.
1. Drill holes in the surface. Use the measurements below
depending on the type of cabinet. See the product's data
booklet for more information about cabinet types.
2. Insert wall plugs, if applicable.
3. Fit the four screws in the mounting holes and cross-tighten the
screws.
W
Dimensions for 16 A
PowerAdapt 3 x 380-415 VAC, 16 A
Pos. Description
W 500 mm
L 500 mm
L1 530 mm
H 250 mm
8
Dimensions for 31 A and 72 A
PowerAdapt 3 x 380-415 VAC, 31 A and 72 A
Pos. Description
W 600 mm
W1 650 mm
L 600 mm
L1 630 mm
H
H 300 mm

5.2 Operation

The system ensures a fully automatic operation.
• DC is connected directly.
• AC is connected with a 1-5 minutes delay.
W1
W
H