Ec Declaration Of Conformity - Nice To-Max T Instrucciones Y Advertencias Para La Instalación Y El Uso

Technical specifications
(Controller and Motor)
Power supply voltage: 230 Vac - 50 Hz
Power absorption (electronic limit switch) Stand-By: 1,8 W
Encoder sensitivity: 2,67°
Maximum admissible torque: 5 / 8 / 15 / 30 / 40 / 50 Nm
Motor body diameter: 45 mm
Continuous operation time: 4 min
Connection cable length: 2,5 m
Operating temperature: -20°C
IP Protection rating: IP 44
Note:
– All technical characteristics refer to an ambient temperature of 20°C (± 5°C).
– Nice S.p.a. reserves the right to apply modifications to the product at any ti me
when deemed necessary, while maintaining the same functionalities and in -
tended use.
8 – English

EC declaration of conformity

Declaration in accordance with the Directives: 2006/95/EC (LVD) and 2004/108/EC (EMC)
Note: The contents of this declaration correspond to declarations in the official document deposit-
ed at the registered offices of Nice S.p.a. and in particular to the last revision available before print-
ing this manual. The text herein has been re-edited for editorial purposes.
A copy of the original declaration can be requested from Nice S.p.a. (TV) I.
Declaration number: 335/To-Max T
Revision: 0
Language: EN
Manufacturer's name: NICE S.p.A.
Address: Via Pezza Alta N°13, 31046 Rustignè di Oderzo (TV) Italy
Type of product: Tubular motor for awnings
Model / Type: XM0900xx1T, XM1500xx1T, XM2800xx1T, XM5600xx1T,
XM7500xx1T, XM9300xx1T
Accessories: xx
The undersigned, Luigi Paro, in the role of Managing Director, declares under his sole
responsibility, that the product specified above conforms to the provisions of the fol-
lowing directives:
• Directive 2006/95/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 12
December 2006 regarding the approximation of member state legislation related
to electrical material destined for use within specific voltage limits, according to the
following harmonised standards:
EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008
EN 60335-2-97:2006 + A11:2008
EN 50366:2003 + A1:2006
• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of
15 December 2004 regarding the approximation of member state legislation relat-
ed to electromagnetic compatibility, repealing directive 89/336/EEC, according to
the following standards:
EN 55014-1:2006, EN 55014-2:1997 + A1:2001, EN 61000-3-2:2006,
EN 61000-3-3:2007
Oderzo, 29.01.10
Ing. Luigi Paro
(Managing director)