Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
z
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries
Z
Black & Decker batteries can be recharged many
times. At the end of their useful life, discard batteries
with due care for our environment:
Do not short-circuit the battery terminals.
u
Do not dispose of the battery(s) in a fire as this may result
u
in a risk of personal injury or an explosion.
Run the battery down completely, then remove it from the
u
tool.
Batteries are recyclable. Place the battery(s) in a suitable
u
packaging to ensure that the terminals cannot be
short-circuited. Take them to any authorised repair agent
or a local recycling station.
10
Technical data
Voltage
No-load speed
Max. torque
Bit holder
Weight
Battery
Voltage
Battery type
Capacity
Charger
Input voltage
Output voltage
Current
Approx. charging time
Level of sound pressure according to EN 60745:
Sound pressure (L
) 63.1 dB(A), uncertainty (K) 3 dB(A)
pA
Acoustic power (L
) 73.1 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Drilling into metal (a
) 1.911 m/s
, uncertainty (K) 1.5 m/s
2
h, D
Screwdriving without impact (a
) 0.549 m/s
h, S
EC declaration of conformity
MACHINERY DIRECTIVE
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-2
These products also comply with Directive
2004/108/EC and 2011/65/EU. For more information,
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
_
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Black & Decker.
Black & Decker Europe, 210 Bath Road, Slough,
AS36LN H2
V
3.6
DC
min
180
-1
Nm 4.8
mm 6.35 (1/4")
kg 0.4
V 3.6
Li-Ion
1.1
9056423*
V
230
AC
V
9.5
DC
mA 100
h 12
2
, uncertainty (K) 1.5 m/s
2
2
%
AS36LN
Kevin Hewitt
Vice-President Global Engineering
Berkshire, SL1 3YD
United Kingdom
12/03/2013
Publicidad
Tabla de contenido
