Water Drainage - Whirlpool DE20W5252 Instrucciones De Uso

WATER DRAINAGE

DRAINING WATER THROUGH THE WATER BUCKET
The Water Full
indicator(20) lights up when the water bucket is full. The machine stops
automatically and the water bucket will have to be emptied.
1. Remove the water bucket
Gently pull water bucket out from the back of the
dehumidifier.
•
The water bucket can be washed using cold or warm water.
Do not use solvents, abrasive products, petrol, chemicals,
cloths or other materials to clean the bucket, as these may
damage it and cause water leakages.
2.Draining the water
•
If the water bucket is extracted during operation or
immediately after turning off the machine, water may drip
onto the base. Therefore, wait for 3 minutes after stopping
the machine to extract the water bucket (if water has already
dripped, wipe dry with a dry cloth).
•
Use the handle to lift, tilt and empty the water bucket..
3. Re-inserting the water bucket
•
Insert the water bucket properly back into the machine. If
the water bucket is not properly positioned, the Water Full
(20) indicator
will light up and the machine will not work.
- 17 -