Samsung RF26 Serie Manual Del Usuario página 17

Setting up your French Door Refrigerator
Remember a level Refrigerator is necessary for getting the door s perfectly even. If you need help, review the
previous section on leveling the Refrigerator.
When the left
door is lower
than the right
door.
1. If you open the drawer (
2. Insert the supplied hex wrench (
3. Please adjust the height by turning the hex wrench (
when you turn the hex wrench counter-clockwise(
1. After adjusting the doors, please insert the supplied fastener-ring (
gap between the hinge-grommet (
to insert depends on the gap.
Two fastener-rings are enclosed with the refrigerator.
Thickness of each fastener-ring is 0.04 inch.
Adjustment
part
), you can see the lower hinge (
) into the shaft ( ) of the lower hinge.
3 4
3
2
3
4
), the door will move up.
) and the lower hinge(
7
Adjustment
part
).
2
) clockwise( ) or counter-clockwise(
) using a pair of pliers (
5
). The number of fastener-rings you'll need
8
When the left
door is higher
than the right
door.
).
3
) in the
6
Setting Up_17