Diemer P1800 RIDICON Manual página 86

 Use
or
 Press
 Set all parameters for the drug selected as it is done in dose mode.
Information:
 The "Out of Dose Range" alarm may be trigged if the dose setting for the
selected drug is above the limit. Press
value to clear the "Out of Dose Range" alarm.
 Press
parameter setting interface; press
LIBRARY interface from the DRUG NAME interface.
Press key to start infusion.
4.3.8 Bolus setup and function
1. Bolus setup
Information:
 There are two modes of BOLUS function: Manual Bolus and Automatic Bolus.
 Bolus is unavailable in Sequential Mode.
 In Manual Bolus mode:
Press and release
blinking.
Press and hold
Information:
 After bolus function is started:
 Preset bolus flow rate, instead of normal flow rate, is displayed.
key to move the cursor onto the desired drug name.
key to select the drug and enter parameter setting interface.
key, you can return to the DRUG NAME interface from the
key ， BOLUS function is activated and"BOLUS" is displayed and
key again immediately to start bolus function.
or key to adjust the dose
key again, you can return to DRUG
88