User Setup - Diemer P1800 RIDICON Manual

5. Set and select system parameters:
 Press or
selected.
 Press key to enter the setup interface.

4.4.1 User setup

4.4.1.1Syringe brand
Information:
 Two types of syringe brand name can be selected: User defined and System
default.
 Press or
 Press key to enter the "Syringe brand" setup interface.
Information:
The syringe brands of system default, please see the chapter 1.6.
 Press or
 Press key to save the above settings and return to work mode interface.
key return to syringe brand setup interface.

Press
 To select user defined syringe brand as same as above. 
Information:
 There are three types syringe brand of user defined:"User-defined_1"
"User-defined _2"
 If the calibration is not done by user, "no calibrated syringe" will be
displayed.
4.4.1.2 BOLUS
Press or

when the parameter is selected, it will be highlight displayed.
key to select the setting items ， it will be highlighted displayed after
key to select "System default".
to select the syringe brand as require.
， "User-defined _3".

key to select the parameter to set （ "Auto- Bolus", "Bolus rate", "Bolus volume", ） ,


，
92