Kohler K-T10087 Guia De Instalacion página 4

Stem Extension
Plastic Bushing
Gasket
Faceplate
Handle
Spout
Setscrew
2. Install the Handles and Spout
Make sure there is a gasket positioned around each opening in the faceplate.
Position the faceplate.
Thread a stem extension onto each valve.
Position a plastic bushing on each stem extension and push in firmly.
Push the handle into place firmly.
Carefully slide the spout onto the spout shank.
Make sure the spout is correctly positioned and tighten the setscrew with the
supplied hex wrench.
1085648-2-A 4 Kohler Co.