Imetec N5501 Manual De Instrucciones página 27

• Before proceeding with the massage, apply the normally used
cosmetic product on the areas that are to be treated. The head
does not need to be dampened.
• Switch the appliance on by pressing the on/off button (1B) and select
the desired vibration intensity: the appliance will start to vibrate.
• Move the head over the various areas of your face using gentle circular
movements, as described in the paragraph on suggestions for use.
AFTER TREATMENT
• After washing and cleansing, rinse your face, neck and low neck
line with cool or lukewarm water and pat dry.
• After the massage, dab any excess cosmetic product with a tissue.
For excellent results, it is necessary to clean the used head
(3,4,5) at the end of every treatment:
• Wash with warm water and neutral soap.
• Remove the excess water with a soft, clean and dry cloth.
• Let the accessories dry completely before putting them away.
ATTENTION! Only clean the outer surface
of the handpiece with lukewarm water and
neutral soap, ensuring that the battery
compartment is firmly shut.
• Dry with a soft, dry cloth.
After cleaning, protect the head used with the protective cap (6) and
store the appliance in the relevant support base.
DO NOT use abrasive detergents or chemicals to clean the appliance.
DO NOT wash in a dishwasher.
MAINTENANCE
EN
25